BuildCyclone is the fourth and final figure in the BuildMasters line measuring approximately 4" in length, 2.75" in width, and 2.5" in height (5" when the crane is fully raised).  He has two shades of Red with the crane being Metallic Red.  Other parts are either Silver or Gray such as the front bumper and parts of the crane arm.  The cab has Smoke-Clear plastic windows which opens to reveal the storage place for BC's pistol.

As with BuildTyphoon, BuildCyclone has four large wheels and similar shape with nice details of a crane.  It even has a ladder mold on the side of the body for the driver to get into the cab.  As a matter of fact, all figures have nice detailed molds.

The crane arm almost has a 180 degree movement but that's about it.   No additional string attachments to the hook which would have been nice like the feature on Endeavor in the Microman99 line.

If you separate the top part of the crane from the main body it will allow you to rotate the upper half 360 degrees simulating the movement of a real crane.

ROBOT MODE:   As with BuildTyphoon, transformation is quite easy starting with the removal of the crane from the body.

Separate the lower/rear half of the vehicle creating the legs.   You should see the knee joints and if you pulled the legs out too far, reconnect the pelvis joint creating the letter "M".  Fold out the hands and arms as you did with BuildTyphoon.  Also rotate the shoulders so that the tires are facing up.  Extend the two pieces at the rear of the vehicle which form the robots toes.   You can also separate the lower half of the legs which are connected with peg joints.

Now go back to the crane piece that you removed earlier.  Fold the Gray piece out and down revealing BuildCyclone's head.  Then rotate his head 180 degrees so he's looking down.  Now place his head in the peg hole located on the robots body which should fit snug.  There's a peg that is on the crane piece which fits into the hole located on BC's back.

Close up of the crane's hydraulic support pegs.

BuildCyclone in Robot Mode with his Pistol & Crane Cannon weapons.

Here's a close up photo of Cyclone's head.

Raise the crane arm slightly then pull out the barrel of his Crane Cannon which is colored Black and hidden on the inside of the crane arm.   His weapon can stay connected to his back or it can be removed, extended and attached to either fist.  You can also remove his pistol from the storage space in the cab and attach it to his other fist.  BuildCyclone stands at a whopping 7" when his Crane Cannon is connected to his back and is facing forward.

If BC seems to be a little heavy with his weapon on his back, you can also extend the two black pieces behind his legs which give added support when standing.  Pretty simple eh?

BuildCyclone is sporting a Red helmet with a Black visor and Silver painted face.  Again I'll say that BuildTyphoon and BuildCyclone are my favorite of the four due to their easy transformation, and both vehicle and robot appearances not to mention the fact that their weapons are awesome!

NOTE:  BuildCyclone can be transformed into BuildKing's arms, either leg, and weapons.